Select Page

CUSTOMER REPAIR – 1979 Williams Gorgar

Repaired Snakepit switch, rebuilt both flippers and three bumpers with new parts. Replaced some LED’s to coordinate colors better, replaced missing red post, purchased new manual. Leveled playfield and filled round inserts with polyurethane. To repair curled triangle inserts, I had to use a heatgun from underneath to loosen them. Then had to place them on a hard glass surface and heat them with heatgun to get them back into their original shape. Then glued them back in place. Replaced bad pinball with new. Replaced one lamp socket at top of playfield that was flickering on and off. Also used a paint roller to touch up/clean up all the scratches around the front of the head. Replaced three Red lane guides that were cracked and ready to fall apart.

Looks and plays great!